Siro-N node is a standard market device with a 7-pin NEMA connection socket (ANSI C136.41). Thanks to Siro-N, STELARIA becomes a plug and play solution for flexible, efficient start-up and with no associated costs. This is why the SIRO-N nodes are equipped with an industrial-style consumption measuring system that allows the energy consumption of each light point to be precisely monitored.
Siro-N incorporates GPS geopositioning to facilitate the installation process as it bypasses the need to manually register each device. It is also equipped with an energy consumption measuring system, 0-10V, 1-10V, DALI and DALI 2.0 interfaces, as well as being set up to connect to sensors.
By automatically generating reports and sending alerts, the STELARIA management system reduces action times and brings down the associated installation maintenance costs. The system also warns of possible faults, identifying if the error is in the LED load, in the driver itself or in the power supply or connection. Thanks to the platform and geopositioning feature, any fault point is immediately and accurately detected.
- Mains grid voltage: 100 Vac - 240 Vac
- Mains grid frequency: 50/60 Hz
- Max. load: 3A
- Mains surge protection: up to 6kV
- Standby: < 0.5W
- Operating: < 2W
- Energy consumption measurement accuracy < 2%
Driver communication interfaces
- 0-10V, 1-10V, DALI and DALI 2.0
- Load capacity: 8 DALI controllers, 8 1-10V controllers
- ISM radio frequency band
- Ingress protection rating: IP66